Skip to content
blendshelf
Models & assets
Spall: Procedural Damage for Blender
Models & assets

Spall: Procedural Damage for Blender

by Alberto Cordero

Asset for Blender 5.0–5.2 by Alberto Cordero. Files: .blend.

$29.00

Get it on Gumroad

Sold by Alberto Cordero. Check current pricing, license and Blender compatibility on Gumroad before purchasing.

Type
Asset
Blender version
5.0–5.2
File formats
.blend
Licence mentioned
GPL
Blender
5.0 to 5.2 (5.2 LTS recommended)
Presets
Concrete, Concrete Strike, Rock, Wood Beam, Masonry, Glass
Built with
Geometry Nodes, non-destructive
Output
Live modifier or baked pieces
License
GPL-3.0-or-later
Last checked
17 Nov 2026

From the creator’s description

Select a mesh, pick a material from the Spall tab, and drag the impact controller to where it got hit. The break follows the controller while you drag, and the full detail lands the moment you let go. Everything is a Geometry Nodes modifier: the source mesh stays, every setting stays live, and when it looks right you bake it to real pieces for a rigid-body sim or a game engine. It's named after spalling: concrete and stone breaking away from a surface under impact. 1.0 is out $29 for one artist, or $89 for a studio of up to 10. Bought Spall in early access? 1.0 is a free update, and it is already in your library. Six material presets Concrete: slabs, walls and floors, with wandering cracks, rubble and reinforcement. Concrete Strike: a hit on a slab or wall. Cracks run out from the point of impact, pieces tip the way the blow pushes them, and their corners crush where they meet. Takes up to ten hits on one slab. Rock: boulders, cliffs and rock faces that split along their beds into flat, uneven slabs. Wood Beam: breaks along the grain. Block Break for chunks, or Splinter Break for torn, pointed fibres, frayed ends and snapped beams that sag. Masonry: brick and block walls that break along their courses. Glass: a radial glass web on panes and windows. What you can do with it One click to start. Select a mesh and click a preset in the Spall tab. Nothing to set up first, and the first click takes a second or two. Drag the hit. One click makes an impact controller; move it and the break follows, with a quick preview while you drag. Add more controllers to break several spots at once (Concrete, Concrete Strike, Rock, Wood Beam's Block Break and Masonry); moving one leaves the others as they were. Draw a crack. Click a start and an end point and the object cracks between them, with a broken face like real concrete. Let it run on to the edges or stop inside the object, and keep both halves or take one side away. Move either end and the crack follows. Broken Band. Tick it and the crack becomes a band of broken pieces along its line, with holes and rubble along it. Blow a hole. One button sets up a hole sized to the object, with rubble and exposed reinforcement on concrete. A hole in a standing wall or column leaves a heap of rubble on the floor below it. Remove Hole fills it back in. Break just one area. Only Here breaks a zone round the hit and leaves the rest whole, with a ragged, cracked edge between them. Push it in, clear a crater. Push the pieces in as far as the controller goes. Use any mesh as the impact object (a ball, a boulder, a car) and the pieces lie against it in its own crater. Rubble and rebar. Sharp, broken-looking chunks of varied size, and a steel bar mat that shows wherever the concrete is gone, with its own material and UVs. Edge Style. Pick how the edges chip: Light, Worn or Damaged. Settle and Uneven. Pieces sink and tip into the damage, and every piece can drop by its own amount, so a broken slab isn't one flat level. Ready for your materials. Broken faces get their own material, textures run on across the cracks, and five shader attributes (broken faces, depth into the piece, a random value per piece, rubble, rest position) let one material do the whole break. Bake clean. Turn the result into separate objects with quad topology that game importers and smooth shading are happy with. Bake can also unwrap every piece into one shared UV map at the texel density you choose. New in 1.0 Faster. The first click on a preset takes a second or two; it used to take more than a minute. Holding a slider no longer stalls the view, and reinforcement and rubble stay visible while you drag. Edge Style: Light, Worn or Damaged. Damaged chips the edges in runs with clean stretches between. Several controllers on Concrete Strike. Each hit gets its own cracks, and its own hole and rubble, up to ten hits. Broken Band on the crack tool, with holes and rubble along the band. Keep Left or Right takes one side away. A crack stays where you put it. Moving one end changes the crack near that end and leaves the far part alone. Floor Pile. A hole in a standing wall or column leaves a heap of rubble on the floor below it. More rubble in holes, in slabs and in walls, and pieces no longer sink into the ground on an object that stands on the floor. Requirements Blender 5.0 to 5.2. 5.2 LTS is recommended. Crush Corners on Concrete Strike needs 5.2. Known issue on Blender 5.3.0: Concrete Strike can crash Blender or change between sessions (a Blender bug). Every other preset works. Use 5.2 LTS for Concrete Strike for now. On 5.3 the sidebar says so. Pure Geometry Nodes and Python, no compiled code or external solver. Tested on Windows. Works on any closed mesh; Glass also takes a single plane. Updating from early access Install the new zip over the old one, open your file and click Update Node Library. Your settings stay. What's in the download spall-1.0.0.zip: in Blender, Edit > Preferences > Get Extensions > Install from Disk. Getting started: 3dartstuff.com/spall License: GPL-3.0-or-later. You get the full source. Support Email [email protected]. Bugs are easiest to fix with a screenshot and the .blend.

More models & assets